Sunday, June 29, 2014

Flywheel Timing Marks

2⁰ after TDC

5⁰ before TDC

Circle for TDC, no ball

                    

                    The triangle on the right is used to check cam timing.

2 comments:

  1. What is the right trimming mark on the flywheel triangle or bb

    ReplyDelete
  2. Once I find top dead center when it's running from my understanding then I take it and make it 5° before top dead center The other question is do I use the 5° scale that's on the distributor base or do I use one of the lines on the flywheel

    ReplyDelete